Power & Energy Meter

Product Price :Get Latest Price

Masibus 2160-A is an easy-to-use, cost effective electrical energy meter that offers all the basic measurement capabilities required for monitoring an electrical installation.

2160-A is available in three display options either 16 x 4 LCD or bright LED or large multi-line backlit LCD panel for superior readability in poor lighting conditions. It provides four parameters display at a same time.

Based on field requirement 2160-A offers various accuracy class options like Class 0.2s / Class 0.5s accuracy as per IS14697/ IEC 62053-22 and Class 1.0 accuracy as per Is13779/ IEC 62053-21.

The CT/PT ratio and installation type are site selectable, making it possible to use the meter in various types of three phase installations.

2160-A provides four-quadrant energy measurement along with ON (working) hour, RUN (Load) Hour, thus helping to measure and control energy cost.

More than basic metering, it optionally provides RS485 port supporting Modbus-RTU protocol, RJ45 port supporting Modnet protocol, THD measurements, Maximum Demand and Programmable pulse output.

Along with Maximum Demand option 2160-A can store Power Interruption count with (Last Power OFF Latest Power ON) Time Date

Meter stores energy and programmed parameters into non-volatile memory.

• Available in Accuracy class 1.0 as per Is13779/ IEC 62053-21
• Optional Accuracy class 0.5s or 0.2s as per IS14697/ IEC 62053-22
• Field programmable CT/PT primary secondary values
• True RMS measurement
• More than 100 Electrical parameters
• 4×16 LCD with back-lit OR Optional 4 lines 4 digit high-visibility LED display 0.4” [10mm] to display various parameters OR Optional large multi-line backlit LCD panel
• Isolated RS485 (Modbus-RTU protocol)
• Digital pulse output for energy
• Auto Scaling from Kilo to Mega to Giga watt
• Auto Scrolling feature for easy readability for all parameters
• Favourite page Store feature
• Store energy register efficiently during power failure.
• Four Quadrant measurement for PF, Power Energy (Active Reactive).
• ON Hour, LOAD HOUR IDLE HOUR register in Non-Volatile Memory
• Password Protection for set parameters

Additional Information:

Product Price :Get Latest Price

Masibus PM2140 is an easy-to-use, low cost electrical panel meter that offers all the basic measurement capabilities required for monitoring an electrical installation.PM2140 has 3 Line 4 digit bright 0.4” LED display for superior readability in poor lighting conditions. Phase wise parameters display has been provided along with various LED indications. PM2140 is available in flush panel mount enclosure having front panel keys for easy set up. PM 2140 has Class 1.0 accuracy as per IS 13779/IEC 62053-21 for Energy and better than 0.5% accuracy for basic instantaneous parameters.

The CT/PT ratio and installation type is site selectable, making the meter possible to be used in various types of three phase installations. More than a basic metering, it provides RS485 port with Modbus-RTU protocol as a standard feature & Relay/ Analog output as optional features. PM2140 provides all the basic electrical parameter measurement along with Minimum, Maximum logging, Isolated Relay Output (with High or Low Side) or Analog Output like 4-20mA or 0-10V DC option.

PM2140 provides energy measurement along with Power Interruption Count, ON hour & RUN (Load) Hour, thus helping to measure and control energy cost. Meter stores energy and programmed parameters into its non-volatile permanent memory.

FEATURES:-

• Energy accuracy class 1.0 as per IS 13779/ IEC 62053-21
• Better than 0.5% accuracy for instantaneous parameters
• Compact flush panel mounting.
• Field programmable CT/PT ratio.
• True RMS measurement.
• Ultra bright 3 line 4 digit LED Display 0.4” for PM2140 with auto scaling capability.
• Universal power supply.
• Optional Relay / Analog output.
• Isolated RS485 (Modbus-RTU protocol)
• 4 keys for configuration.
• Password protection for set parameters.
• Permanent memory based energy storing along with other parameters like ON Hour, LOAD HOUR and Power Interruption Count.

Product Price :Get Latest Price

Masibus EM 2140 Dual Source Energy Meter is an easy-to-use, low cost electrical Energy meter that offers all the basic measurement capabilities required for monitoring an electrical installation.

EM 2140 Dual Source Energy Meter has 8 digit bright 0.36” LED display for superior readability in poor lighting conditions. LED indication has been provided for phase reversal as well as for all time healthy phase indication.

EM 2140 is available in flush panel mount enclosure having front panel keys for easy set up. EM 2140 Dual Source Energy Meter has Class 1.0 accuracy as per IS 13779/IEC 6205321.

The CT/PT ratio and installation type is site selectable, making the meter possible to be used in various types of three phase installations.

More than a basic metering, it optionally provides RS485 port with ModbusRTU protocol & also Relay/ Pulse output.

It has EB/DG dual source energy measurement option for measurement of energy through Electricity Board or Diesel Generator. EM 2140 Dual Source Energy Meter provides energy measurement along with ON hour & RUN (Load) Hour, thus helping to measure and control energy cost.Meter stores energy and programmed parameters into its non-volatile Permanent memory.

FEATURES:-

• Accuracy class 1.0 Compact flush panel mounting
• Field programmable CT/PT ratio
• True RMS measurement
• Ultra bright 8 digit LED Display 0.36” with auto scaling capability
• Universal power supply
• Optional Pulse output / Relay output
• Optional EB/DG dual source input
• Optional Isolated RS 485 (Modbus-RTU protocol) 4 keys for configuration
• Password protection for set parameters
• Permanent Memory based energy storing along with other parameters like ON Hour, LOAD HOUR and Power Interruption Count